Upgrade your cargo area with precision-fit boot liners from OAD4X4, custom-molded to suit your vehicles. Each liner is designed to match your boot shapes, with raised lip to help contain spills, mud for a clean and protected cargo space. Below, you'll find a step-by-step installation guide to help you quickly and securely fit your new boot liner (1-piece/3-piece) and kick mats for the best results.
Catalogue
- Installation Steps & Notes (1-Piece / 3-Piece / Kick Mats)
- Cleaning & Maintenance Tips
- What to do if your liner arrives with wrapping or deformation
- Warranty & Support
Product
1-Piece Boot Liners / 3-Piece Boot Liners / Kick Mats (Seat Back Protectors)
1-Piece Boot Liner — Installation Steps
Step 1 Unpack & Check the Fit
- Remove the liner from the box/bag and unfold it.
- Place the liner in the cargo area to ensure proper fit before proceeding to the next step.
Step 2 Clean the boot
- Remove all items. Vacuum thoroughly so the liner sits flat and doesn’t trap grit underneath.
Step 3 Position the boot liner
- Place the liner into the boot with the raised edges facing upward.
- Align the back edge first (closest to the seatbacks), press the liner down into the corners and contours.
Notes
- Some models have removable boot floors or adjustable height panels. Ensure the liner matches your current floor setting.
3-Piece Boot Liner — Installation Steps
Step 1 Unpack & Check the Fit
- Remove the liner from the box/bag and unfold it.
- Place the liner in the cargo area to ensure proper fit before proceeding to the next step.
Step 2 Clean the boot
- Remove all items. Vacuum thoroughly so the liner sits flat and doesn’t trap grit underneath.
Step 3 Install the seat-back pieces
- Make sure the Left/Right and Front/Back orientation is correct before installation.
- Align the edges and press the liners firmly onto the back of the rear seats to secure them in place, using the pre-installed Velcro strips on each liner.
- Ensure the liners are fully secured before raising the seats.
Step 4 Install the larger pieces
- Put the larger liner in the cargo area, no velcro is required, as its design keeps it securely in place.
Kick Mats (Seat Back Protectors) — Installation Steps
Step 1 Unpack & Check the Fit
- Remove the kick mat from the box/bag and unfold it.
- Place the kick mat on the corresponding seat back to ensure proper fit.
Step 2 Attach the kick mat
- Make sure the Left/Right and Front/Back orientation is correct before installation.
- Align the edges and the seat-back cut out, press the mats firmly onto the seat backs to secure them in place using the pre-installed Velcro strips on each kick mat.
Cleaning & Maintenance Tips
Regular and proper cleaning will help maintain their appearance and prevent build-up over time, extending the life of your mats.
Routine cleaning
- Simply wipe the surface with a damp towel or cloth to keep them clean.
Deep cleaning
- Remove them from the vehicle.
- Use a gentle all-purpose cleaner with warm water and a soft brush to clean grooves and edges.
- Rinse thoroughly and air dry completely before reinstalling.
What to do if your liner arrives with wrapping or deformation
It’s normal for molded liners shipped folded or rolled to show temporary creases or curled edges when first unpacked. This is due to its flexible TPE material, but these usually improve after use. To speed up the recovery process, you can follow a few simple methods below:
- Place a heavy object on the affected area to help it flatten quickly.
- Leave the liner in the sun for a few hours.
- Use a hair dryer on low/medium heat. Heat the affected area, then press and hold it in shape.
If it doesn’t improve
Take clear photos to show the issue and contact us with your vehicle make/model/year and order info.
Warranty & Support
All OAD4X4 cargo mats / kick mats are backed by a 3-Year warranty, giving you long-lasting protection and peace of mind.
If you have any issues with fitment, installation, or maintenance, our customer support team is here to help, feel free contact us and we'll assist you promptly.